Omron F250-UME, Software Manual

Page: 886 / 999

6-2-(36)
Normal Serial Interface Section 6-2
Note
1. The displacement direction settings are shown in the following table.1
2. If these settings are changed, one rectangular region will be set and any
previously drawn figures will be deleted.
The following settings data is for gravity and axis.
64 Region 1 Axis angle upper limit (-180.000 to 180.000)
65 Axis angle lower limit (-180.000 to 180.000)
The following settings data is for processing item region and reference position mea-
surement.
Settings
data 66 Region 1 Region upper left X (0 to 511) (See note 2.)
67 Region upper left Y (0 to 483) (See note 2.)
68 Region lower right X (0 to 511) (See note 2.)
69 Region lower right Y (0 to483) (See note 2.)
70 Reference position X (0 to 511)
71 Reference position Y (0 to 483)
Data Details
No. Displacement X Displacement Y Displacement
q
0 None None None
1 Displacement compen-
sation region 0 None None
2 Displacement compen-
sation region 0 Displacement compen-
sation region 0 None
3 Displacement compen-
sation region 0 Displacement compen-
sation region 1 None
4 None Displacement compen-
sation region 0 None
5 Displacement compen-
sation region 1 None None
6 Displacement compen-
sation region 1 Displacement compen-
sation region 0 None
7 Displacement compen-
sation region 1 Displacement compen-
sation region 1 None
8 None Displacement compen-
sation region 1 None
9 Midpoint None None
10 None Midpoint None
11 Midpoint Midpoint None
12 Displacement compen-
sation region 0 Midpoint None
13 Midpoint Displacement compen-
sation region 0 None
14 Displacement compen-
sation region 1 Midpoint None
15 Midpoint Displacement compen-
sation region 1 None
16 Displacement compen-
sation region 0 Displacement compen-
sation region 0 Displacement compen-
sation region 0
17 Displacement compen-
sation region 1 Displacement compen-
sation region 1 Displacement compen-
sation region 1
18 Midpoint Midpoint Relative angle