6-2-(19)
Normal Serial Interface
Section 6-2
CHECK
Set Normal data to the unit to output measurement results. Only the command
response will be output if Normal data is not set.
SeeAlso
Refer to
2XWSXW)RUPDW1RUPDO
.
Function 2
Executes one measurement on the image being displayed.
Input
MEASURE /I Delimiter
Output
Command executed correctly:
Measurement result Delimiter
OK Delimiter
Command not executed correctly:
ER Delimiter
CHECK
Set Normal data to the unit to output measurement results. Only the command
response will be output if Normal data is not set.
SeeAlso
Refer to
2XWSXW)RUPDW1RUPDO
.
Function 3
Starts continuous measurement.
Input
MEASURE /C Delimiter
Output
Command executed correctly:
OK Delimiter (One time)
Measurement result Delimiter (Continu-
ous measurement)
Command not executed correctly:
ER Delimiter
CHECK
Set Normal data to the unit to output measurement results. Only the command
response will be output if Normal data is not set.
SeeAlso
Refer to
2XWSXW)RUPDW1RUPDO
.
Function 4
Stops continuous measurement.
Input
MEASURE /E Delimiter
Output
Command executed correctly:
OK Delimiter
Command not executed correctly:
ER Delimiter
6-2-2-13
MENUKEY
Function
Switches the serial interface input to Menu Operation mode.
Input
MENUKEY Delimiter
Output
None