2-22-(21)
Rotation Positioning
Section 2-22
2-22-5
Measurement Screens
Detailed measurement values can be displayed on the screen in Monitor and
Run modes. These values are useful when adjusting measurement conditions.
This section describes what kind of information can be displayed for rotation
positioning.
SeeAlso
Refer to
6(&7,210RQLWRU0RGHDQG5XQ0RGH
for details on Monitor and
Run modes.
CHECK
Press the SHIFT+ESC Keys on the Run Screen to access the following screen
and change Display results to Details.
Use the Up or Down Key to change to the unit for which rotation positioning is
set and the following detailed screens will be displayed.
Use the SHIFT+Right or Left Keys to switch in order between the three
screens.
Judgement Result
0.Scn 0
RUN
Image 0 Freeze
NG
67ms
End
Image status
Freeze(Before scroll)
Display image
Image size
Display results
:
:Image0
: All
:
Details
A
0
1.Rotate position
Judge :
NG
0.Scn 0
RUN
NG
45ms
Judgement result for this unit
Position at or above candidate level.
Displayed only when search verification
set to ON.
Inspection region displayed in OK color
for OK result and displayed in NG color
for NG result.
(Figures drawn in OR mode are displayed
in solid lines and figures drawn in NOT
mode are displayed in dotted lines.)
Search coordinates
Region number
