2-44-(1)
Display Measurement
Section 2-44
2-44
Display Measurement
The Display Measurement processing item is used to display any measure-
ment data on the screen in Run and Monitor Modes.
The display is set using expressions so the calculation results of expressions
using region measurement values or measurement values can be displayed.
Example: Displaying Measurement Values in Combination with Display String
Use this processing item to display any measurement data on the screens in
Run and Monitor Modes. The display is set using expression, so region mea-
surements or calculations using measurement values can be displayed.
CHECK
The data set here will be enabled when None or Positions are selected under
System/Display/Display settings/Display results.
CHECK
Even when the display image is set to be displayed as a reduced image, the
characters will always be displayed in the specified position.
Operational Flow
STEP 1: Setting Measurement Conditions
Use expressions to set the measurement data to be displayed.
1.
Select Display measure.
Difference from reference: 20
0.Scn 0
RUN
OK 45ms
Image 0 freeze
Measurement details
Measurement value
Set
measurement
data.
Set display
conditions.
Set display
position.
STEP 1
STEP 2
STEP 3
0.Scn 0=SET=
ENT:Set SFT+ESC:Edit
0.Camera image
1.Binary pos. comp
2.Edge position
3.Calculation
4.Display measure
5.