2-15-(18)
EC Defect
Section 2-15
STEP 5: Changing the Latitude of the Angles
If circles are deformed, interfering with removal or causing removal of incorrect
elements, the latitude of the angles of the edge codes judged to be a circle can
be changed. The latitude can be set between 0 and 99 (default: 20).
1.
Select Latitude of angle.
Latitude of angle
Latitude of angle:[ 20]
OK
The latitude of angle is set for the 90
angle between the edge code
arrow and a vector from the center of the circle. (0 to 99, default: 20)
If, for example, the latitude is set to 15
, points at 75
to 105
will be
judged to be edge points on the circumference.
Edge code
arrow
Vector from
center
As shown below, the angle of the edge code changes when there is
an irregularity on the circumference of the circle.
Set the latitude of angle to remove circles that are not required.
Removal region0(Circle)
Circle color
Search conditions
Removal region
Radius
Latitude of angle
Clear
