2-29-(1)
Calculation
Section 2-29
2-29
Calculation
The Calculation processing item is used to perform calculations using the
results and measurement values for the processing items registered to the
units.
Example: Finding the Width of a Measurement Object
Two edge positions are found beforehand. An expression for calculating the
difference between the two edge positions is set and this expression is used to
find the width.
If combined with conditional branching, the inspection conditions can be
changed based on the calculation result.
Finding this width
Region 0
Region 1
Edge positions
Edge positions
Width = region 0 edge position
-
region 1 edge position.
Edge position
Edge position
Calculation
Conditional branch
End
Set an expression to find the width.
Calculation result: NG
Calculation result: OK
Pattern inspection