2-13-(3)
Classification
Section 2-13
2-13-1
Registering Models
A section that will serve as the classification reference is registered as the
model. Up to 36 versions of a model can be registered with index numbers 0 to
35.
When the model has variations in printing quality or shape, register multiple
models to the same index number. Up to 5 models can be registered to the
same index number. When a model is registered, the center of the model is
registered as the search coordinates.
CHECK
Models can be created by combining up to 3 different figures. Regions with dif-
ficult shapes can be drawn and sections not to be measured can be left out of
the model region by combining different figures.
CHECK
When multiple models are registered to the same index number, the Controller
automatically creates auxiliary models between the models that are regis-
tered. If the auxiliary models are added to the registered models when
searches are performed, stable searches are possible even if there are varia-
tions between the registered models. Select whether or not to use auxiliary
models in searches under Detailed settings. Refer to page 2-13-(12) for infor-
mation on auxiliary models.
1.
Select Classification.
The settings selections will be displayed.
0.Camera image
1.Classification
2.
0.Scn 0=SET=
ENT:Set SFT+ESC:Edit
1.Classification
Model registration
Search region
Judgement conditions
Detailed conditions
Coordinate mode
