2-49-(1)
Display Line, Display Box, Display Circle, and Display Cursor
Section 2-49
2-49
Display Line, Display Box, Display Circle, and Display
Cursor
Use the Display Line, Display Box, Display Circle, and Display Cursor process-
ing items to display figures based on measurement results on screens in Run
and Monitor Modes. The position of the figure coordinates is set using an
expression.
Example: Displaying a Display Cursor at the Label Detection Position
Use these processing items to display on screens in Run and Monitor Modes
the figures based on measurement results.
Set the coordinates of the position of the figure using expressions.
CHECK
The data set here will be enabled when None or Positions is selected under
System/Display/Display settings/Display results.
CHECK
Even when the display image is set to be displayed as a reduced image, the
reduced figure is displayed in the corresponding position.
CHECK
Select Results display/Display figure to display figures in fixed positions.
SeeAlso
Refer to
'LVSOD\)LJXUH
.
Operational Flow
The operational flow will be described here using Display box as an example.
Make adjustments as necessary when other options are selected.
Setting Display Conditions
Set the conditions for display.
The asterisk (*) indicates the default setting.
0.Label
RUN
OK 45ms
Image 0 freeze
Display cursor appears at the detection position.
STEP 1
STEP 2
Set display
conditions.
Draw the
figure.
Conditions
Color
Property
End
:
OK color
: Solid line
Color
OK color*:Green
NG color:Red
Only displayed for lines, boxes, and circles.
Solid line*
Dash line
