2-16-(36)
EC Positioning
Section 2-16
2-16-4
Setting the Coordinate Mode
Select the type of coordinate values.
CHECK
If the coordinate mode is changed after the judgement conditions have been
set, the measurement results will change also. Change the judgement condi-
tions to enable correct measurement.
1.
Select Coordinate mode.
The Coordinate Mode Settings Screen will be displayed.
2.
Make the settings for each item.
3.
Select End.
The settings will be registered and the screen in (1.) will return.
Coordinate mode
Output coordinate:
After scroll
Calibration : OFF
End
Before scroll:Output made using the coordinate values
before position displacement compensation.
After scroll*: Output made using the coordinate values
after position displacement compensation.
Refer to
7HUPLQRORJ\
for differences between
output coordinates.
ON:
Output made using coordinate values set using calibration.
OFF*:
Output made using Camera coordinate values.
The asterisk (*) indicates the default setting.
1. EC position
Measurement image
Extract edges
Select region
Coordinate mode
Coordinate mode
Output coordinate:
After scroll
Calibration : OFF
End
