6-2-(10)
Normal Serial Interface
Section 6-2
Ethernet Settings
Set the IP address and the subnet mask.
Consult with the network administrator to make sure that the IP addresses are
not duplicated in the network.
1.
Select Ethernet.
The Communication (Ethernet) Settings Screen will be displayed.
2.
Make the IP address and subnet mask settings.
CHECK
Make the IP address and subnet mask settings as follows:
IP address: For all except the rightmost part of the address, set the same
address as the connected computer.
Set a value for the rightmost part of the address that is not duplicated in
the network.
Subnet mask: Make the same setting as the connected computer.
3.
Select End.
The settings will be registered.
Multi-drop
Set to OFF.
Unit No.
Cannot be used with Ethernet connections. The setting will be
ignored.
Item
Possible settings
System settings
Camera settings
Communication
Display
Operation settings
Measurement control
Startup mode
Date/Time
System information
Serial
Normal
Host link
Parallel
Ethernet
Communications(Ethernet)
IP address :[192.168.250.100]
Subnet mask:[255.255.255.0]
End
Same as personal computer
Do not duplicate.