2-48-(1)
Display Figure
Section 2-48
2-48
Display Figure
The Display Figure processing item is used to display figures (lines, boxes, cir-
cles, and arcs) at fixed positions on the screens in Run and Monitor Modes.
Example: Displaying Lines To Indicate the Center of the Screen as a Guide to
the Position of the Measurement Object
Use this processing item to display lines, boxes, circles, and arcs at a fixed
position on screens in Run and Monitor Modes.
CHECK
The data set here will be enabled when None or Positions is selected under
System/Display/Display settings/Display results.
CHECK
Even when the display image is set to be displayed as a reduced image, the
reduced figure is displayed in the corresponding position.
CHECK
The figure will be displayed if it is registered to the unit, regardless of whether
or not Display figure is executed using the branching control processing items.
CHECK
Select Display Line, Display Box, Display Circle, or Display Cursor under dis-
playing results to display figures using measurement results.
SeeAlso
Refer to
'LVSOD\/LQH'LVSOD\%R['LVSOD\&LUFOHDQG'LVSOD\&XUVRU
.
Operational Flow
STEP 1: Setting Display Conditions
Set the conditions for display.
0.Label
RUN
OK 45ms
Image 0 freeze
Always display lines
STEP 1
STEP 2
Set display
conditions.
Draw figure.
Conditions
Color
End
:
Figure0
Figure color
Figure 0 to Figure 6 (Figure 0)
Refer to
6(&7,21
6\VWHP6HWWLQJV
.
