2-35-(7)
Conditional Branching
Section 2-35
2-35-3
Selecting the Branch Destination Unit Numbers
Select the numbers of the branching destination units. Select a destination unit
for both YES and NO results (for when the comparative calculation results are
true and false).
1.
Select Yes
(End processing).
The list of units for the current scene will be displayed.
2.
Select the branch destination unit and press the ENT Key.
Up/Down Keys: Scroll through the unit numbers.
CHECK
Set a unit number after the Branch unit number. If an earlier unit number is
set, the processing may continue in a loop.
The settings will be registered.
3.
Set the No
(End processing) destination unit in the same way.
CHECK
Always register End as the last of the processing items for the branch des-
tination units for both Yes
and No
to indicate that the branch has end-
ed.
SeeAlso
Refer to
(QG
.
2.Branch
Exp.A : U1. IN
Exp.B : 0
Conditions :A=B
YES (End processing)
NO (End processing)
YES
(End processing)
0.Camera image
1.Classification
2.Branch
3.Edge position
4.DO judge
5.End
6.Pattern
2.Branch
Exp.A :
Exp.B :
Conditions :A=B
YES 3.Edge position
NO (End processing)