2-14-(16)
Density Defects
Section 2-14
The initial Defect (var. box) screen will be displayed.
5.
Select Measurement conditions.
The Measurement Conditions Settings Screen will be displayed.
6.
Make the settings.
7.
Select End.
The settings will be registered and the screen in (4.) will return.
STEP 2: Drawing the Measurement Region
The measurement region is drawn by specifying the upper, lower, left, and
right edges of the measurement object. If even one of the edges cannot be
located, the judgement result will be NG.
When one of the edges is selected, the settings for the conditions for the
selected edge will be displayed. In this example, the settings for the left edge
will be explained. Make adjustments as necessary when setting conditions for
the upper, lower, and right edges.
Region0(Defect(var.box))
Measurement conditions
Left edge
Upper edge
Right edge
Lower edge
Reference registration
Judgement conditions
Detailed conditions
Clear
Measurement conditions
:
:
:
:
:
Box
ON
ON
Both
ON
Direction
Large defect
Small defect
Small defect color
Density
End
Measurement
Left edge
Upper edge
Lower edge
Right edge