2-16-(13)
EC Positioning
Section 2-16
The Input Parameter Settings Screen will be displayed.
3.
Make the settings for each item.
4.
Select End.
The settings will be registered and the screen in (2.) will return.
STEP 4: Registering Reference Positions
Register reference positions here to detect position displacement. Positions
can be inspected if the difference between the reference position and the mea-
surement position is obtained using a calculation.
Example 1: Inspections to Detect If the Measurement Object is in the
Same Position
Place the measurement object in the correct position and register that position
as the reference position.
Example 2: Inspecting Position from a Specified Position
Change the reference position to a suitable position.
Input parameter
End
Radius
Latitude of radius
:
:
[ 50]
[20]
Reference position
Measurement position
Reference position (changed to suitable position)
