2-19-(17)
EC Circle Count
Section 2-19
2-19-9
Measurement Screens
Detailed measurement values can be displayed on the screen in Monitor and
Run modes. These values are useful when adjusting measurement conditions.
This section describes what kind of information can be displayed for EC circle
count.
SeeAlso
Refer to
6(&7,210RQLWRU0RGHDQG5XQ0RGH
for details on Monitor and
Run modes.
CHECK
Press the SHIFT+ESC Keys on the Run Screen to access the following screen
and change Display results to Details.
Use the Up or Down Key to change to the unit for which EC circle count
inspection is set and the following detailed screens will be displayed.
Use the SHIFT+Right or Left Keys to switch in order between the three
screens.
Judgement Result
Circle Information (Center Position and Radius)
:
: Image0
: All
:
Details
End
Image status
Freeze(Before scroll)
Display image
Image size
Display results
0.Scn 0
RUN
1.EC circle count
Judge :
NG
Quantity:4
0.Scn 0
RUN
NG
45ms
The measurement result for this unit (In
this example, when number of circles set to
6 under Judgement conditions.)
No. of circles found.
NG radius
The display cursor is shown in NG color.
NG circular value
The circumference is shown in NG color.
1.EC circle count
CenterX CenterY Radius
0. 81.263 253.120 21.021
1.198.962 254.612 20.946
2.392.861 251.961 20.634
3. 81.263 435.564
11.021
4.198.962 435.612 20.986
5.392.861 434.961 20.634
0.Scn 0
RUN
NG
45ms
Displays detailed information
for candidate circles.
Use the center X and center Y
information to determine which
circle the information is for.
