2-9-(4)
Circle Position Compensation
Section 2-9
2-9-1-1
Not Rotate
A model is registered using four points on the circumference. Using this model,
the position displacement is detected and compensation performed.
STEP 1: Registering Models
Register four points on the circumference as the model.
1.
Select Position compensation.
A list of compensation modes will be displayed.
2.
Select Not rotate.
The initial screen for Not Rotate Mode will be displayed.
3.
Select Model registration.
3
1
2
Set the
search
range.
Register
the model.
Set the
judgement
conditions.
Model 3
Model 1
Model 0
Model 2
1.Circle pos. comp
Position compensation
Detailed conditions
Model reference
Not rotate
1 model
Defect(Circle)
Defect(Arc)
Circular angle
Model registration
Search Region
Judgement conditions
Clear