4-(23)
Backing Up Data
Section 4-2
Precaution
Do not turn OFF the power or input a RESET signal executing backup.
Data in memory will be destroyed, and the Controller may not operate cor-
rectly the next time it is started.
When the save operation has been completed, a confirmation message
will be displayed.
7.
Press the ENT Key.
The display will return to the main setup menu.
8.
Turn OFF the Controller power supply.
9.
Remove the F250-UME from Memory Card slot 0.
10. Turn ON the Controller power supply.
CHECK
If the power supply is turned ON while the F250-UME is still mounted, the
Setup Menu will be started again. Always remove the F250-UME before
starting the Controller.
The Main Menu will start.
Loading Backup Data
finished.
Put off the memory card
and restart.
OK
Set up
Select items
Install
Backup data load
Clear memory
---- ---ms
0.Scn 0
MON
Image 0 freeze
