2-15-(28)
EC Defect
Section 2-15
Input Parameter
1.
Select Direction.
The selections for the registration method will be displayed.
2.
Select Input parameter.
The setting screen will be displayed.
3.
Set the parameters so that the lines that are not needed are removed.
HELP
Angles: See page 2-15-(27).
CHECK
The latitude of angle is set on both sizes of the angle. For example, if the
angle is set to 180
and the latitude is set to 15
, lines at 165
to 195
will
be removed.
4.
Select OK.
The settings will be registered and the screen in (1.) will return.
2-15-3-4
Clearing Removal Regions
The clear operation is performed separately for each region.
Removal region0(Oriented line)
Removal region
Direction
Clear
Input figure
Input parameter
Latitude angle
:[ 15]
Angle:[180]
OK