2-24-(29)
Lot Number OCV 1
Section 2-24
2-24-9
Measurement Screens
Detailed measurement values can be displayed on the screen in Monitor and
Run modes. These values are useful when adjusting measurement conditions.
This section describes what kind of information can be displayed for the Lot
Number OCV1 processing item.
SeeAlso
Refer to
6(&7,210RQLWRU0RGHDQG5XQ0RGH
for details on Monitor and
Run modes.
CHECK
Press the SHIFT+ESC Keys on the Run Screen to access the following screen
and change Display results to Details.
Use the Up or Down Key to change to the unit for which Lot Number OCV1 is
set and the following detailed screens will be displayed.
Use the SHIFT+Right or Left Keys to switch in order between the two
screens.
Inspected Regions
The judgement result for this unit, the set lot number, the inspected regions,
and the extraction frame for each number will be displayed.
• Auto Extract Mode
• Fixed Extract Mode
End
Image 0 Freeze
Image status
Freeze(Before scroll)
Display image
Image size
Display results
0.Scn 0
RUN
:
:Image0
: All
:
Details
NG
67ms
OK 45ms
1. Lot-No. OCV1
Judge : OK
Lot-No. : 0123
0.Scn 0
RUN
Judgement result for this unit
Lot number that was set
Inspected region (solid lines)
Extraction frames (dotted lines)
OK 45ms
1. Lot-No. OCV1
Judge : OK
Lot-No. : 0123
0.Scn 0
RUN
Judgement result for this unit
Lot number that was set
Inspected region (solid lines)
Extraction frames (dotted lines)