2-25-(10)
Labeling
Section 2-25
Correcting or Clearing Figures
1.
In the screen for step 6 above, select the number of the figure to be
changed or cleared using the Up and Down Keys and press the ENT Key.
The figure for the figure number selected using the cursor will be displayed
with solid lines. The selections Correct and Clear will be displayed.
2.
Select either Correct or Clear and press the ENT Key.
If Correct is selected, the cursor will be displayed. Correct the size and po-
sition of the figure as desired.
If Clear is selected, the selected figure will be cleared.
Region
Figure 0
Add
Figure0
Figure1
End
Figure 1
Correct
Clear
