2-15-(19)
EC Defect
Section 2-15
The setting screen will be displayed.
2.
Set the latitude of angle to remove circles that are not required.
CHECK
• Set the latitude of angle to a small value to detect even small irregularities
in the circle.
• Set the latitude of angle to a large value to ignore small irregularities in
the circle and detect only large defects. The following functions can be
used simultaneously to increase efficiency.
• Use a mask size of 5x5 to extract edges.
SeeAlso
See
([WUDFWLQJ(GJHV
.
• Set smoothing for filtering the image.
SeeAlso
See
,QSXWWLQJ&DPHUD,PDJHV
:
Camera Image
Filter Again (To perform smoothing twice)
3.
Select OK.
The settings will be registered and the screen in (1.) will return.
2-15-3-2
Removing Lines
Lines are detected using edge codes.
The lines with the most common edge code (direction) will be deleted from the
edge-extracted image so this function can be used even if the measurement
object is at a different orientation.
Latitude of angle
Latitude of angle:[ 20]
OK
1
2
Change
the line
extracting
conditions.
(As required)
Set the
removal
region.
Example
Measurement object
Defect
If removal regions 0 to 3 are drawn at the same size
(whole screen)
Removal in removal
region 2
Removal in removal
region 1
Removal in removal
region 3
Removal in removal region 0