2-22-(8)
Rotation Positioning
Section 2-22
Changing the Point Output as the Measurement Value
CHECK
If the model is re-registered, the search coordinates are changed to the center
position of the new model.
There are 3 registration methods available: Manual, gravity, and edge.
Manual
Any position in the model rectangle can be specified (in pixel units) as the
search coordinates.
1.
Select Search coordinates.
Search coordinate
changed to a suitable position
Model
(center of model is the default)
Registration
method
Details
Manual
Any position inside the model rectangle can be registered.
Gravity
The image is converted to binary and the center of gravity of the
white pixel area in the model rectangle is registered as the search
coordinates.
Select this method to use the center of gravity of the measure-
ment object as the search coordinates.
Edge
The edge position is used for registration. This method can be
used if the measurement object is rectangular.
Select this method to register the edge or corner of the measure-
ment object as the search coordinates.
Search coordinates
(center of gravity)
Search coordinates
(cross point of lines)
Region0
A
A
Model registration
n
Search coordinate
Search region
Judgement conditions
Model reference
Clear
