7-(10)
FAQ
Section 7-3
General Measurements
Measurement Support
Results Display
Question
Answer
QUEST Character Verification
Can the characters that are read (A to Z, 0 to 9, :, /, _
(space)) be output directly as text strings to an external
divide?
Turn ON the Output results under the Measurement
conditions. The text strings will be output through the
serial port.
Refer to
48(67&KDUDFWHU9HULILFDWLRQ
.
EC Positioning
Can an edge-extracted image be captured?
No. Edge-extracted images are produced by process-
ing camera buffer images, so they cannot be captured.
Only images input through the Camera Image process-
ing item can be captured.
Question
Answer
How do I set a formula with more than
64 characters in an expression?
Set up an additional expression and an expression that will reference
the additional expression.
Refer to
&DOFXODWLRQ
.
Is there any way to count NG images? Yes, by using the Calculation processing item. Use the following proce-
dure.
Example: Counted NG images for Binary Defect
1. Set a Calculation unit after the Binary Defect unit.
2. Set the following expression for calculation 0 in the Calculation unit:
U2.D00-U1.JG
Refer to
&DOFXODWLRQ
.
CHECK
To output the count to an external device, change the Calculation pro-
cessing item to a DO Data or a Normal Data processing item (depend-
ing on where the data is to be output.)
Refer to
'2'DWD
or
1RUPDO'DWD
.
Question
Answer
Can figures display with the Display Figure processing
item be changed through serial communications?
No, they cannot be changed through serial communi-
cations and must be changed from the Console.
Refer to
1RUPDO6HULDO,QWHUIDFH
.
0.Camera image
1.Binary defect
2.Calculation
3.
0.Scn 0=SET=
ENT:Set SFT+ESC:Edit
Judgement result
-
1: NG, 0: OK