2-23-(14)
ECM Search
Section 2-23
The registration selections will be displayed.
2.
Select Gravity.
The Binary Level Settings Screen will be displayed.
3.
Move the cursor to the upper limit and use the Left and Right Keys to
change the value.
Right Key:
Increases the lowest digit by one.
SHIFT+Right Keys: Increases the value 10 times faster.
Left Key:
Decreases the lowest digit by one.
SHIFT+Left Keys:
Decreases the value 10 times faster.
Up and Down Keys: Switches between setting items.
4.
Use the same method to change the lower value.
CHECK
Set the upper and lower limits so that the measurement object is displayed
as white pixels.
5.
Select OK.
The settings will be registered and the screen in (1.) will return.
A display cursor will appear at the center of gravity (search coordinates).
CHECK
It is also possible to set the binary level so that measurement is performed
only for an intermediate density range.
Manual
Gravity
Edge
:Move :Change
Binary level
Reverse
Auto
OK
Upper[
255
]
Lower[128]
Lower limit
Upper limit
Auto
The Controller automatically
determines binary level.
Reverse
Reverses white and
black in the display.
:Move :Change
Binary level
Upper[255]
Lower[128]
Reverse
Auto
OK
