2-29-(24)
Calculation
Section 2-29
Judgement Character Display
Line Result Display and Box Result Display
Circle Result Display
Display Cursor Results Display
Judgment JG
When unit judgement results are used in expressions, the following two-stage
judgement is performed.
1.
Judgement based on judgement conditions set for each unit
As a result, “0.000” (OK) or “-1.000” (NG) is output to the measurement re-
sult.
2.
Judgement of the measurement result from (1) based on the upper and
lower judgement limits for that screen
Example 1: Calculation Using Judgement Result for Unit 0
Measurement item
Details
Display judgement DJ
Displayed judgement result characters
Measurement data DT Result of set expression
Measurement item
Details
1st point X X1
Result of expression set to 1st point X
1st point Y Y1
Result of expression set to 1st point Y
2nd point X X2
Result of expression set to 2nd point X
2nd point Y Y2
Result of expression set to 2nd point Y
Measurement item
Details
Center X X
Result of expression set to center X
Center Y Y
Result of expression set to center Y
Radius R
Result of expression set to radius
Measurement item
Details
X coordinate X
Result of expression set to X coordinate
Y coordinate Y
Result of expression set to Y coordinate
0.000
[ 0.000]
[ 0.000]
Calculation0.
U0.JG
ENT:Change
Measurement :
Upper :
Lower :
Unit 0 judgement result
Judgement value displayed based
on judgement conditions for unit 0
(0:000: OK;
-
1.000:NG)
Judgement conditions for U0.JG
Set both upper and lower
judgement limits to 0.000 to have
only 0.000 give an OK result.