2-29-(26)
Calculation
Section 2-29
The settings for the expression are shown in the following diagram.
CHECK
Expressions are calculated in the order shown in the following diagram.
When using the calculation results from another expression, set the calcula-
tion number to a value larger than the number of the calculation for which the
results are being used. If a smaller number is set, the result of a previous cal-
culation will be inserted instead of the results of the latest calculation.
Calculation0.
DIST(U1.R00SX,U1.R00SY,
U2.R00SX,U2.R00SY)
Calculation2.
U3.D01-U3.D00
158.121
[ 180.000]
[ 130.000]
ENT:Change
Calculation1.
DIST(U1.R00X,U1.R00Y,U2.R00X,
U2.R00Y)
ENT:Change
ENT:Change
Measurement :
Upper :
Lower :
158.121
[ 180.000]
[ 130.000]
Measurement :
Upper :
Lower :
Set an expression to find the distance between
two reference position points.
Set an expression to find the distance
between two measurement position points.
Substituted with calculation 1 and
calculation 0 results
Finds the difference between calculation 0 and calculation 1.
↓
↓
↓
...
Calculation order
Calculation 0
Calculation 1
Calculation 7
