3-(2)
Testing Measurements
Section 3-1
3-1
Testing Measurements
3-1-1
Entering Monitor Mode
Use the following procedure to check that measurements are being correctly
performed with the set measurement conditions.
CHECK
The key allocations for the Console Keys used to make input can be changed.
In the following explanations, it is assumed that the key allocations are at the
default settings. If they are not, adapt the procedure accordingly. Refer to
6(&7,216\VWHP6HWWLQJV
.
Entering Monitor Mode from Set Mode
1.
Display the Set Mode Screen.
2.
Press the ESC Key to leave Set Mode and enter Monitor Mode automati-
cally.
Entering Monitor Mode from Run Mode
1.
Move the cursor to RUN and press the ENT Key. The mode selections will
be displayed.
2.
Select MON to enter Monitor Mode.
0.Scn 0=SET=
0.Camera image
1.Fine matching
2.
ENT:Set SFT+ESC:Edit
Image 0 freeze
---- ---ms
0.Scn 0
MON
OK 67ms
0.Scn 0
RUN
Image 0 freeze
SET
MON
RUN
SYS
TOOL
SAVE
