1-(4)
Installing the Application Software
Section 1-3
1-3
Installing the Application Software
This section describes how to install the processing items in the F250-UME
Application Software to the Controller. The Setup Menus are used to install
these processing items.
1-3-1
Starting the Setup Menu
1.
Check that the basic components are connected.
CHECK
Always refer to the Setup Manual when connecting components or wiring the
power supply or ground wires.
2.
Mount the F250-UME Application Software Card to Memory Card slot 0.
3.
Turn ON the power supply switch to the Monitor.
4.
Turn ON the Controller power supply.
The Language Selection Screen for the Setup Menus will be displayed.
CHECK
The language selected here applies only to the Setup Menus.
POWER
SYNC
Camera
Monitor
Console
Power supply
Language
Japanese
English