6-2-(61)
Normal Serial Interface
Section 6-2
Settings
data
177
Inspection
region 0
Region upper left X (0 to 511) (See note.)
178
Region upper left Y (0 to 483) (See note.)
179
Region lower right X (0 to 511) (See note.)
180
Region lower right Y (0 to 483) (See note.)
The following settings data is for defect measurement.
Settings
data
181
Inspection
region 0
Extracting level
0: Level 1 1: Level 2 2: Level 3
3: Level 4 4: Level 5
182
Defect color
0: Black
1: White
183
Defect width upper limit (0 to 100)
184
Defect width lower limit (0 to 100)
185
Defect length upper limit (0 to 999)
186
Defect length lower limit (0 to 999)
The following settings data is for gravity and area and labeling measurement.
Settings
data
187
Inspection
region 0
X upper limit (-9,999.999 to 9,999.999)
188
X lower limit (-9,999.999 to 9,999.999)
189
Y upper limit (-9,999.999 to 9,999.999)
190
Y lower limit (-9,999.999 to 9,999.999)
191
Area upper limit (0.000 to 9,999,999.999)
192
Area lower limit (0.000 to 9,999,999.999)
193
Binary level upper limit (0 to 255)
194
Binary level lower limit (0 to 255)
195
Reverse binary level
0: Not reversed
1: Reversed
196
Defect display
0: Simple
1: Detail
The following settings are for labeling measurement.
Settings
data
197
Inspection
region 0
No. of labels upper limit (0 to 2,500)
198
No. of labels lower limit (0 to 2,500)
199
Noise area upper limit (0 to 9,999,999.999)
200
Noise area lower limit (0 to 9,999,999.999)
201
Fill Holes Mode
0: OFF
1: ON
202
Sort
0: Area descending 1: Area ascending
2: X gravity descending 3: X gravity ascending
4: Y gravity descending 5: Y gravity ascending
203
Outside trimming
0: OFF
1: ON
204
No. of labels (0 to 2,499)
Data
Details