2-15-(37)
EC Defect
Section 2-15
STEP 2: Setting Measurement Conditions
Set the area and sort conditions and label number for measuring labels.
Set the other conditions as required.
CHECK
The coordinates set using calibration are not affected by labeling.
The asterisk (*) indicates the default setting.
1.
Select Measurement conditions.
Measurement conditions
End
Area
[ 0.000 247808.000 ]
Outside trimming
Filling up holes
Sort
Label No. [ 0]
Defect display
:
:
:
:
:
:
:
OFF
OFF
Area descending order
Simple
Note When X and Y center of gravity are sorted, the upper left corner of the measurement region
is the origin.
Sort example:
0
X
Y
Labeling result
Label numbers in
descending order
by area
Label numbers in
ascending order by
X center of gravity
0
2
2
0
1
1
0
2
1
Label numbers in
descending order by
Y center of gravity
Area range for labels (0 to 9,999,999.999 (0*))
Output conditions for measurement value:
OFF*:Measures the binary image.
ON:
Measures all pixels outside the inspected
region as white pixels.
Output conditions for measurement value:
OFF*:Outputs area and center of gravity coordinates
before filling holes.
ON: Outputs area and center of gravity coordinates
after filling holes.
Label number (0 to 2499 (0*)) for defect evaluation.
Defect display method on measurement screen (regions displayed separately):
Simple*: A display cursor indicates defects.
Detail:
Defects shown in NG color. Longer processing time required than for simple display.
Refer to page 2-15-(42).
Conditions for reassigning label numbers
Area descending order*:Sorts in descending order by area.
Area ascending: Sorts in ascending order by area.
Gravity X descending:Sorts in descending order by center of gravity X coordinate. (See note.)
Gravity X ascending:Sorts in ascending order by center of gravity X coordinate. (See note.)
Gravity Y descending:Sorts in descending order by center of gravity Y coordinate. (See note.)
Gravity Y ascending:Sorts in ascending order by center of gravity Y coordinate. (See note.)
Inspected R0(Labeling)
Binary
Measurement conditions
Inspected region
Judgement conditions
Clear