2-24-(25)
Lot Number OCV 1
Section 2-24
2.
Select 1st digit.
The region setting screen will be displayed.
3.
Draw the inspected region for the first digit as a square block.
Specify the upper left and lower right coordinates.
Up/Down/Left/Right Keys: Move the cursor.
ENT Key:
Confirms the setting.
When the lower right coordinates have been specified, the inspected re-
gion will be set and digit number selection screen will be displayed.
4.
Draw inspected regions for the other digits in the same way as for the first.
5.
When regions have been drawn for all digits, press the Esc Key from the
digit selection screen.
The screen in (1.) will return.
CHECK
If the number of digits set for the lot number in the measurement conditions
is changed, all of the inspected regions will be cleared. Repeat the settings
from (1.).
Correcting Fixed Regions
1.
Select the digit for which the region is to be corrected.
The selected region will be displayed in solid lines.
Inspected region
271,225
1st digit
2st digit
3st digit
Inspected region
1st digit
2st digit
3st digit
Inspected region