6-2-(18)
Normal Serial Interface
Section 6-2
6-2-2-11
MEASOUT: Measure Out
Function 1
Confirms the mode of the Controller: Monitor (results not output) or RUN
(results output).
Input
MEASOUT Delimiter
Output
Command executed correctly:
Mode number Delimiter
OK Delimiter
Command not executed correctly:
ER Delimiter
• Mode numbers are as follows:
Example
This example indicates that the Controller is in Run Mode.
Input
MEASOUT Delimiter
Output
1 Delimiter
OK Delimiter
Function 2
Changes the mode of the Controller: Monitor (results not output) or RUN
(results output).
Input
MEASOUT <Mode number> Delimiter
• Refer to Function 1 for mode numbers.
Output
Command executed correctly:
OK Delimiter
Command not executed correctly:
ER Delimiter
Example
This example changes the Controller to Run Mode.
Input
MEASOUT 1 Delimiter
Output
OK Delimiter
6-2-2-12
MEASURE (M)
Function 1
Executes one measurement.
Input
MEASURE Delimiter
Output
Command executed correctly:
Measurement result Delimiter
OK Delimiter
Command not executed correctly:
ER Delimiter
Mode
number
Mode
0
Monitor (results not output)
1
RUN (results output)
