Omron F250-UME Software Manual Download Page 359

Page: 359 / 999

2-15-(26)

EC Defect

Section 2-15

Input Figure

Select Direction.

The selections for the registration method will be displayed.

Select Input figure.

An arrow will appear in the center of the screen.

Press the TRIG Key.

The arrow will point in the direction that indicates the edge code for the dis-
played image.

Move the arrow to on top of the line to be removed.

Up/Down/Left/Right Keys: Move the line up, down, left, and right.

Press the ENT Key.

Removal region0(Oriented line)

Removal region

Direction

Clear

Input figure

Input parameter

Direction

Summary of Contents for F250-UME








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for F250-UME

Reviews:

Related manuals for F250-UME

Brands by name

Popular brands

Omron F250-UME, Software Manual

Search results

Summary of Contents for F250-UME

Reviews:

Related manuals for F250-UME

Brands by name

Popular brands