2-16-(31)
EC Positioning
Section 2-16
Limits of length
@
: Set the permissible range for the length.
To find the coordinates of the cross point of lines regardless of their length,
set Specifying length to OFF. The settings of the line lengths and the limits
of the length will be ignored.
The asterisk (*) indicates the default setting.
4.
Select the sorting conditions for determining which cross point coordinates
will be output. Up to 20 points can be obtained. The coordinates for the first
point matching the selected conditions will be output. (X ascending*, X de-
scending, Y ascending, Y descending)
The asterisk (*) indicates the default setting.
CHECK
To output the coordinates for the second and subsequent points or to out-
put the center, use Calculation or other processing items and set the for-
mula.
SeeAlso
Refer to
&DOFXODWLRQ
.
5.
Only one angle (
q
) will be output as the measurement results for the lines
that are found. Select which position
q
will be obtained. (The lines that are
considered are the two lines meeting the intersection point.)
Setting item
Selections
Specifying length
ON, OFF*
Length
@
1 to 999
Limits of length
@
1 to 200 (80:120*)
Example: To extract the 4
cross points shown below
Set the Length 1 and Length 2 to the
lengths for the areas indicated in the
following diagram.
Length 2
Length 1
Example: Find the average of 4 points to output the center point.
Center