2-16-(32)
EC Positioning
Section 2-16
Example: To extract the cross point shown in the following diagram, set tar-
get color to black and sorting condition to X ascending order.
1.
Display the figure selections using the same operations as outlined under
steps (1.) to steps (3.) for Circle. Refer to page 2-16-(20).
2.
Select Multi-points.
The selections for setting conditions will be displayed.
3.
Select Measurement conditions.
The Measurement Conditions Settings Screen will be displayed.
4.
Make the settings for each item.
5.
Select End.
Obtained midline
between two sides.
Side 2
Side 1
Midline of the Corner*
Side 1 and Side 2
With the target color between the two
sides, the side in the clockwise
direction is side 1 and the side in the
counterclockwise direction is side 2.
Output intersection
The asterisk (*) indicates the default setting.
New registration(Region0)
Circle
Cross point
Box
Multi-points
Measurement conditions
Line conditions
Search region
Reference registration
Clear
End
Measurement conditions
Target color
Specifying angle
Range of angle
Limits of angle
Specifying length
Length 1
Limits of length 1
Length 2
:
:
:
:
:
:
:
:
Black
OFF
[ 90]
[10]
OFF
[100]
[ 80:120]%
[ 50]
