2-5-(5)
Binary Position Compensation
Section 2-5
4.
Move the cursor to the upper limit and use the Left and Right Keys to
change the value.
Right Key:
Increases the lowest digit by one.
SHIFT+Right Keys: Increases the value 10 times faster.
Left Key:
Decreases the lowest digit by one.
SHIFT+Left Keys:
Decreases the value 10 times faster.
Up and Down Keys: Switches between setting items.
5.
Use the same method to change the lower value.
CHECK
Set the upper and lower limits to make the measurement object white.
6.
Select OK.
The settings will be registered and the screen in (2.) will return.
CHECK
It is also possible to set the binary level so that measurement is performed
only for an intermediate density range.
STEP 2: Using the Fill Profile Function (Setting Judgement Conditions)
The fill profile function is set when the exterior of the measurement object is
being measured.
Turn ON the fill profile function to measure the whole area between the start
point (black pixels to white) and the end point (white pixels to black) in the
measurement region as white pixels. The default setting for this function is
OFF.
Example
:Move :Change
Binary level
Upper[255]
Lower[128]
Reverse
Auto
OK
Make the measurement object white.
Measurement region
Start point End point
This area will be measured as white pixels.
Fill profile: ON
Input image
Measurement region