1-(59)
Basic Operations
Section 1-6
1-6-5
STEP 5: Start Test or Measurement
This section explains how to check if measurements are being correctly per-
formed with the set measurement conditions using Monitor Mode, and how to
make actual measurements using Run Mode.
1-6-5-1
Entering Monitor Mode
Use the following procedure to check that measurements are being correctly
performed with the set measurement conditions.
1.
Display the Set Mode Screen.
2.
Press the ESC Key to leave Set Mode and enter Monitor Mode.
0.Scn 0=SET=
0.Camera image
1.Fine matching
2.
ENT:Set SFT+ESC:Edit
Image 0 freeze
---- ---ms
0.Scn 0
MON
