Omron F250-UME Software Manual Download Page 702

Page: 702 / 999

2-40-(2)

DO Judgement

Section 2-40

2-40-1

Selecting Reflection in Overall Judgement

Select whether or not to reflect the judgement result for this processing item in
the overall judgement output to the parallel interface OR signal.

CHECK

The overall judgement is also displayed on the Monitor and Measurement
Screens.

The overall judgement can be set to not be displayed also by using the display
settings.

SeeAlso

Refer to

6FUHHQ'LVSOD\DQG0RQLWRU

Select DO judge.

The list of set expressions will be displayed.

Select Conditions.

The Conditions Settings Screen will be displayed.

Change the setting.

Select End.

The setting will be registered and the screen in (1.) will return.

0.Scn 0

MON

OK 67ms

0.Scn 0=SET=

0.Camera image
1.Binary pos. comp
2.Edge position
3.Edge position

4.DO judge

Conditions

0.
1.
2.
3.
4.

Conditions

Reflect in overall judge : OFF

End

Summary of Contents for F250-UME








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for F250-UME

Reviews:

Related manuals for F250-UME

Brands by name

Popular brands

Omron F250-UME, Software Manual

Search results

Summary of Contents for F250-UME

Reviews:

Related manuals for F250-UME

Brands by name

Popular brands