6-2-(72)
Normal Serial Interface
Section 6-2
Note
1.
The settings for differences in data 41, 57, and 58 are as following when
setting and reading the values.
2.
If these settings are changed, one rectangular region will be set and any
previously drawn figures will be deleted.
EC Circle Count (Measurement Data)
CHECK
Only the allocations for circle 0 and circle 63 are listed here. Refer to the allo-
cations for circle 0 to calculate the numbers for circles 1 to 62.
Data
Setting
Reading
41
Reflected in the white defect and black
defect differences.
The white defect difference is output.
57
Reflected in the white defect difference.
The white defect difference is output.
58
Reflected in the black defect difference.
The black defect difference is output.
Data
Details
Measure-
ment
data
0
Judgement result
-2: Not measured.
-1: NG
0: OK
1
Quantity
2
Circle 0
Center X
3
Center Y
4
Radius
5
Circular value
6
Circle 1
Center X
7
Center Y
8
Radius
9
Circular value
to
... (Same as for circle 0)
254
Circle 63
Center X
255
Center Y
256
Radius
257
Circular value