6-3-(4)
Host Link Serial Interface
Section 6-3
Inputting the Measurement Trigger from the STEP Signal
Note
If a response is not received within 5 seconds, a timeout error will occur in the
Controller because the Programmable Controller may be disconnected or mal-
functioning. An error message will be displayed on the Controller’s screen and
the parallel interface’s ERR signal will be turned ON.
Controller
The parallel interface's BUSY signal will be ON during measuring.
STEP
Measure.
Write the processing results
to the Write Area.
Return response indicating that
the write operation was completed
normally.
End
Programmable Controller