2-21-(24)
QUEST Character Verification
Section 2-21
1.
Select Inspected region.
An arrow cursor will appear.
2.
Draw a rectangular inspected region.
Specify the upper left and lower right coordinates.
Up/Down/Left/Right Keys: Move the cursor.
ENT Key:
Confirms the settings.
CHECK
Draw the region so that only the target characters fall within the region. Use
End Image to remove anything other than the target characters that over-
lap either vertically or horizontally on the inspection region.
SeeAlso
Refer to page 2-21-(13).
Only edges that overlap either vertically or horizontally can be removed. If
the edges overlap both vertically and horizontally, the characters cannot be
extracted correctly. If the edges overlap in both directions, adjust the posi-
tion and size of the extracting region so that only the characters to be ex-
tracted fall within the extracting region.
When the bottom right coordinates have been set, the screen in (1.) will re-
turn.
K B - 6 5 7 6 2
0 1 . 1 1. 0 7
Region0
Mode
Inspected region
Set string
Clear
Inspected region
412,190
K B - 6 5 7 6 2
0 1 . 1 1. 0 7
KB-65767
01.11.07
KB-65767
01.11.07
Incorrect
Correct
Adjust size of extracting region.