2-34-(6)
Trend Monitor
Section 2-34
The Parameter and Graph setting method selections will be displayed.
2.
Select Parameter.
The Parameter Judgement Conditions Settings Screen will be displayed.
3.
Set the judgement and warning conditions.
4.
Select End.
The settings will be registered and the screen in (1.) will return.
Graph
Move lines on the graph to set the upper and lower judgement limits and the
warning range.
CHECK
Actual measurements can be executed and the measurement values dis-
played on a graph to be used as a guide when setting lines here.
SeeAlso
Refer to page 2-34-(8).
1.
Select Judgement conditions.
The Parameter and Graph setting method selections will be displayed.
2.
Select Graph.
Parameter
Graph
End
Judgement conditions(Parameter)
Limits of judgement :
Limits of warning :
[ 346.500: 423.500]
[ 365.750: 404.250]
3.Trend monitor
Measurement
Judgement conditions
Display range
Detailed conditions
NG display
Save data
Parameter
Graph