1-(46)
Basic Operations
Section 1-6
The Labeling Conditions Settings Screen will be displayed.
SeeAlso
Refer to page 1-(26) for information on inputting values.
2.
Change the settings.
3.
Select End.
The settings will be registered and the screen in (1.) will return.
1-6-3-3
Registering Models
An image of an acceptable product is registered as the model. The image of
the measurement object read by the Camera is compared with this model and
defects are detected where there are differences from the model.
CHECK
The image stored to Image 0 is used as the measurement image for Fine
Matching.
CHECK
The model registration range is (6,6) to (505,477).
If pre-processing (filtering) is set for the measurement image, the range that
can be registered will be reduced further.
End
Labeling
Area :
[ 0.000 : 247808.000 ]
Sort :
Area descending order
Label No. :[ 0]
Screen size
Registration range:
(6,6) to (505,477)
Filter size of 3
3
484
pixels
512 pixels
-
1 pixel
Filter size of 5
5
Registration range:
(7,7) to (504,476)
Registration range:
(8,8) to (503,475)
-
2 pixels