1-(8)
Installing the Application Software
Section 1-3
3.
Press the ENT Key.
The Main Screen for the Setup Menu will return.
4.
Turn OFF the power supply to the Controller.
5.
Remove the F250-UME from Memory Card slot 0.
6.
Turn ON the Controller power supply.
CHECK
If the power is turned ON while the F250-UME is still mounted, the Setup
Menus will open. Always remove the F250-UME before turning ON the power
supply.
After a while the Camera Settings Screen will be displayed.
SeeAlso
Refer to page SECTION 5 System Settings.
7.
Select the camera to be connected.
8.
If using Intelligent Lighting, select the model.
9.
Select END.
The Basic Screen will be displayed.
Set up
Select items
Install
Backup data load
Clear memory
Camera settings
Camera :F160-S1
Intelligent Lighting 0:
Out of use
Intelligent Lighting 1:
Out of use
Intelligent Lighting 2:
Out of use
Intelligent Lighting 3:
Out of use
End
Image 0 freeze
---- ---ms
0.Scn 0
MON