1-(42)
Basic Operations
Section 1-6
1-6-3-1
Selecting the Method for Matching with Model
This section describes how to select a matching method suitable for the mea-
surement object.
HELP
Refer to page 1-(43) for information on boundary inspection and defect inspec-
tion methods.
1.
Select Fine matching.
End
Measurement conditions
Boundary inspection:
Defect inspection :
Target :
ON
Labeling
Both
Color for defects (Both*, white, black)
Processing time is reduced if either white or black
is selected when the defect color is consistent.
The asterisk (*) indicates the default setting.
Use the following as a guide for selection:
To detect pattern
defects
To detect minute
defects
(Choose the most stable method.)
Boundary inspection: ON
Defect inspection: Labeling
Boundary inspection: ON
Defect inspection: Binary
Boundary inspection: OFF
Defect inspection: Labeling
Boundary inspection: ON
Defect inspection: Labeling
For the fastest
inspections
When there are
defects near the edge
of the measurement
object
0.Scn 0=SET=
ENT:Set SFT+ESC:Edit
0.Camera image
1.Fine matching
2.