1
K-O3-N+K-436-B Display User Manuals
Press start from next, then display will show 001. When you turn off display,
number will start counting from 001 again .. Go to F9 and set F1-E1 .
This manual is fit for all displays. K-436-B available functions include F1-E1
F1-E2 F2-E2 F4 F6 FP F9
Brief instruction
F1 Storage Mode (Set Transmitters number)
E1-Register Transmitters
E2-Register Counter Number
F2 Deletion Mode (Delete Transmitter Number)
E1-Delete Transmitters
E2-Delete Counter Number
F3 Display Setting
E1 Display Mode
E2 Storage Number
F4 Logout Setting (Remove Timing Setting)
F5 Cycle Mode
F6 Voice Setting
E1-Voice Mode
E2-
The times of Voice Announcements
E3-Whether to read the number when cycling
E4-Volume Setting
E5-Brightness setting
E6-Operational sound navigation
E7-
“
Number
”
position
E8-To be developed
E9-Whether read Counter Number (Suit for queue call system)
F7 Keyboard Setting (To be developed)
F8 Key Settings
E1 Single-key or Multi-key Setting
E2 Voice pairing
FP Choose the first number you like to start register
F9 Restore Factory Settings
: Setting key, Confirm key, Move digit key
: Exit system
: Up key, Increase number key
: Down key, Decrease number key
F1 Storage Mode
E1 Register Transmitters
1. Press “
” key 2 seconds, the screen displays F1
2. Press “
” key, screen displays E1
3. Press “
” to confirm, the screen displays 01, “1” is flashing, and press “ ” “ ” “
”
key to select the number you want to save.
4. Press any key from the transmitter, you will hear a voice (success) the number has been
registered successfully and then the number will skip to the next one,.
5. Press “
” it will exit to “E1”, press “
” again to exit setting state.
NOTE: If you hear a voice (failure), it means number has been used.
E2 Register Counter Number
1. Press “
” key 2 seconds, the screen will display F1
2. Press “
” key, screen will display E1, press
to E2
