Mova D506i User Manual Download Page 532

Page: 532 / 644

530

Playing Back a Melody (continued)

Using

Other

Functions

Melody

Player

The melody list appears.

Playing back melodies from the melody list

In the guidance screen or player screen, select “melody list” from the
submenu.

Select a melody and press

(select).

The guidance screen or player screen appears. Subsequent operations are the same as for
playback from the guidance screen or player screen.

■

To display melody information

Select a melody from the melody list, and select “music INFO” from the submenu.

Check the contents and press

(OK).

Repeat playback/Random playback

Repeat playback

Melodies are played back repeatedly. You can choose to repeat 1 melody or all melodies.

Icons appear.

Normal playback
(No repeat play)

1 repeat play

All repeat play

Press

during playback or during pause.

•

The playback method changes each time

is pressed.

•

Press

(play) during pause to start Repeat playback from the selected melody.

•

If pressed during playback, Repeat playback starts from the beginning of the melody that is
being played back.

•

Adjusting the sound volume during melody playback also changes “melody volume” (see p.121).

•

If an incoming call is received during playing back a melody, playback ends and you can answer the call.
Mail or Messages can also be received.

N o t e

Summary of Contents for D506i





































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for D506i

Reviews:

Related manuals for D506i

Brands by name

Popular brands

Mova D506i, User Manual

Search results

Summary of Contents for D506i

Reviews:

Related manuals for D506i

Brands by name

Popular brands