manualshive.com logo in svg

Mova D506i, User Manual

Share
Download
Mova D506i User Manual Download Page 85

83

Record

Message

4

Settings

When

You

C

annot

A

nswer

Calls

You can change the time until the recorded message starts playing after the phone
rings.

[Record Message Shift Time]

Setting the time until the answer message starts

[Default] 9s

1

In standby, select “setting” 

“record message” 

“MSG shift time” from

the menu.

2

Use 

to 

to enter the time and press 

(set).

Record Message Shift Time is set.

•

You can set a time period of between 0 and 120 seconds.

•

Use 

to adjust the amount of time. 

•

If you make a mistake, use 

to delete the number and reenter the correct number.

•

If you set the Voice Mail Service (see p.448) or Call Forwarding Service (see p.455) along with Record
Message, the priority varies depending on the Ring Time settings of the Voice Mail Service and Call
Forwarding Service. To precede Record Message, set the shorter migration time for Record Message
than for the Voice Mail Service or Call Forwarding Service. Note that when there are already a total of 10
recorded messages and Voice memos or the remaining recording time is less than 10 seconds, the Voice
Mail Service or the Call Forwarding Service is automatically selected regardless of the Ring Time settings.

When you subscribe to the Voice Mail Service or Call Forwarding Service

Setting time preloaded by default

Approx. 9 sec

Approx. 10 sec

Approx. 7 sec

Record Message Shift Time

Voice Mail Service ring time

Call Forwarding Service ring time

•

When the Auto Answer function is on and an earphone is connected, to precede Record Message, set the
shorter migration time for Record Message Shift Time than for the Auto Answer ring time.

N o t e

▲

▲

M472

Summary of Contents for D506i





































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands