Mova D506i User Manual Download Page 423

Page: 423 / 644

421

Using

i-
p

pli

rograms

Downloading

i-
ppli

rogram

Quit the application after running.

A prompt appears asking whether you want to save the application.

•

A prompt does not appear for applications that cannot be saved.

•

The actual screen displayed depends on whether the mobile phone information or stored data is
used.

•

When Software Information Display is on, information about the application appears. Review the
information and then press

(OK) (see p.419).

•

If you try to save when an older version of the same application exists, a prompt appears asking
whether to upgrade to the latest software.

Select “YES” and press

(select).

The application is saved in the built-in memory.

•

Setting screens appear depending on the specifics of the application you are working with
(see p.420).

•

To not save the application, select “NO”.

[Set Software Information Display]

Displaying i-

ppli details when downloading

You can set your mova to display information about a software program you obtain
through a site.

[Default] no

In standby, select “i-

ppli” “set

ppli”

“soft DESCRIP” from the menu.

•

You can also display the i-

ppli menu by pressing

twice while in standby.

•

Alternatively, you can select “setting”

“set i-

ppli ” from the menu.

Select “1.yes” and press

(select).

The software information display is turned on.

•

To not display software information, select “2. no”.

▲

•

7 applications are preloaded in your D506i (see p.431).

•

Some i-mode sites may require your mobile phone information (model number, manufacturer serial
number, etc.) when you download i-

ppli programs.

•

Some i-mode sites may charge for access to information (i-mode pay sites).

N o t e

M951

／

M4 71

▲

Summary of Contents for D506i





































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for D506i

Reviews:

Related manuals for D506i

Brands by name

Popular brands

Mova D506i, User Manual

Search results

Summary of Contents for D506i

Reviews:

Related manuals for D506i

Brands by name

Popular brands