Mova D506i User Manual Download Page 504

Page: 504 / 644

502

About the Maintenance of the

Memory Stick Duo

Using

Other

Functions

About

the
Maintenance

the
Memory

Stick

•

This operation can also be performed from the folder list or the preview
screen of “camera album”.

•

“one image” or “two or more images” cannot be specified from the folder
list.

•

“two or more images” cannot be specified from the preview screen.

Select still image from the picture list or the title list of “camera album”, and
select “print setting” from the submenu.

Specifying the print settings

From the “camera album” of

Memory Stick Duo, you can select in advance the still

images and the number to print using the DPOF-compatible printer.

Select “1.one image” and press

(select).

■

To select and set multiple still images

Select “4. two or more images” and press

(select).

From the picture list or title list, select a still image and press

(select).

•

You can select multiple still images.

•

To cancel your selection, select the still image you selected and press

(REL).

Press (decide).

■

To set the still images in bulk

Select “2. all images in FLD” to set all still images in a folder or select “3. all images”
to set every still images, and press

(select).

■

To release the settings

Select “1. one image” and press

(select).

Use

to set the amount of copy number to 0 and press

(decide).

Proceed to Step 4.

■

To release the settings in bulk

Select “5. release all in FLD” to release all settings in a folder or select “6. release all”
to release all settings, and press

(select).

Proceed to Step 4.

Use

to enter the number of copies, and press

(decide).

•

Up to 999 can be copied.

Select “YES” and press

(select).

Print settings are set.

•

The number of images set print settings appears in the picture list.

•

To cancel the operation, select “NO”.

Summary of Contents for D506i





































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for D506i

Reviews:

Related manuals for D506i

Brands by name

Popular brands

Mova D506i, User Manual

Search results

Summary of Contents for D506i

Reviews:

Related manuals for D506i

Brands by name

Popular brands